Blog

Cura 3D slicing software installation and operation

Cura 3D slicing software installation and operation

10/12/2021 12:00pm 3 minute read Tips

CURA INSTALLATION AND OPERATION CURA is an open source 3D printer slicing application, it is widely used in 3D printing. Cura-15.04.3 as an example, let's... more »

Why are some models not printable?

Why are some models not printable?

10/09/2021 12:00pm 2 minute read Tips

WHY ARE SOME MODELS NOT PRINTABLE? There’s a fixed-size nozzle that you can use to precisely print very fine details. If you often print subtle... more »

How to solve cracking or breaking of layers during 3D printing

How to solve cracking or breaking of layers during 3D printing

10/06/2021 12:00pm 3 minute read Tips

HOW TO SOLVE CRACKING OR BREAKING OF LAYERS DURING 3D PRINTING 3D printing builds a model by printing one layer at a time. Each subsequent layer is... more »

How to deal with the 3D printer nozzle jam

How to deal with the 3D printer nozzle jam

10/05/2021 12:00pm 2 minute read Tips

HOW TO DEAL WITH THE 3D PRINTER NOZZLE JAM Your 3D printer needs to melt and squeeze out several kilograms of plastic during its life cycle. All plastics... more »

How to stop 3D prints from warping

How to stop 3D prints from warping

10/04/2021 12:00pm 1 minute read

HOW TO STOP 3D PRINTS FROM WARPING When using a 3D printer, the first layer always fails to print, and warps when print several layers. It is really make... more »