Dragon Hotend V2.0
Dragon Hotend V2.0
Dragon Hotend V2.0
Dragon Hotend V2.0
Dragon Hotend V2.0
Dragon Hotend V2.0
Dragon Hotend V2.0
Dragon Hotend V2.0

Dragon Hotend V2.0

PJ-00018-1

Regular price $124.30 Sale price$93.21
/
Shipping calculated at checkout.
Size
  • In stock, ready to ship
  • Inventory on the way
  • Superior heat break performance
  • Increased structural rigidity
  • 450°C rated for larger temperature operating range
  • Drop in replacement for E3D V6 hotend. Such as PRUSA printer
  • The HF version(High Flow Capacity) is the same overall dimensions as the standard one
  • Painless volcano experience
  • Collision will not break your heaterbreaker anymore
  • Nozzles can be changed with one hand without grasping the hot block. Nickel plating copper alloy in the hot block will not soften at high temperatures in excess of 550℃
  • Maximum extrusion flowrate test result (PLA@215C)
  • E3D V6 HOTEND copper heater block: 1020mm/min ≈ 40.01 mm³/second
  • Dragon hotend: 1150 mm/min ≈46.08 mm³/second
  • Dragon hotend HF: 1560 mm/min ≈62.51 mm³/second
  • Size: Nozzle: 0.4MM/1.75MM filament; Hotend compatible with 1.75MM filament
  • Compatibility:
  1. No V6 adapter status: Compatible with diy design; 
  2. V6 adapter status: Compatible with all V6 HOTEND interfaces, Prusa I3 MK3/MK3S, Titan Extruder, and BMG Extruder, etc.
  • Package: 1 x Dragon-Heatsink, 1 x Dragon-Customize Break, 1 x Dragon-Plated Copper Block, 1 x T-V6 Plated Copper Nozzle, 1 x V6 adapter, 1 x Screw package
  • Dragon Hotend Installation: Google Drive

This site is protected by reCAPTCHA and the Google Privacy Policy and Terms of Service apply.

Customer Reviews

Based on 2 reviews
100%
(2)
0%
(0)
0%
(0)
0%
(0)
0%
(0)
B
Brayden Martin
A legit dragon hotend

This is a legit dragon hotend. I was kinda sketched out at first, but I'm pretty sure that's related to Slice enforcing the mosquito patent against cloners. I understand that cloners are bad and all, but most folks just can't justify spending $200 on a hotend to put on a $200 printer.. I purchased the high flow variant, and it works extremely well for large nozzle/fast printing and dumping a lot of thermal energy into filament in a short amount of time. If you plan to print w/ mostly 0.2-0.5mm nozzles at <0.3mm layer height, DO NOT BUY THE HIGH FLOW VERSION. I have experienced several clogs relating to heat creep, I believe because I did not have filament going through fast enough and the excess heat creeping up the melting zone. When I swapped in the non-high flow heat break/heat sink, it resolved my clogging issues. don't overestimate your flow reqs; All in all this hotend has most of the attractive features of the mosquito for half the price, and that's hard to beat.

M
Miles Smith
Dragon Standard flow

Great quality hotend. Fit perfectly


Recently viewed